case A: separate fax line (no voice calls received)
If you have a separate fax line on which you receive no voice calls, and you
have no other equipment connected on this phone line, connect your
HP Officejet as described in this section.
1
Using the phone cord supplied in the box with your HP Officejet, connect
one end to your telephone wall jack, then connect the other end to the port
labeled “1-LINE” on the back of your HP Officejet.
Caution!
If you do not use the supplied cord to connect from the
telephone wall jack to your HP Officejet, you probably will not be
able to fax successfully. This special 2-wire cord is different from
the more common 4-wire phone cords you might already have in
your office. For more information about how to tell the difference
between the cords, see
I have difficulties when sending faxes and
when receiving faxes
on page 120.
2
(Optional) Change the Rings to Answer setting to 1 ring or 2 rings.
For information about how to change this setting, see
set the number of
rings before answering
on page 39.