clean the lid backing
Minor debris can accumulate on the white document backing located
underneath the lid of the HP Officejet.
1
Turn off the HP Officejet, unplug the power cord, and raise the lid.
Note:
When you unplug the power cord, you will need to plug it back in
within 72 hours. If you do not plug it back in within 72 hours, you will need
to reset the date and time. For more information, see
set the date and time
on page 50.
2
Clean the white document backing with a soft cloth or sponge slightly
moistened with a mild soap and warm water.
3
Wash the backing gently to loosen debris; do not scrub the backing.
4
Dry the backing with a chamois or soft cloth.
Caution!
Do not use paper-based wipes as these might scratch the
backing.
5
If this does not clean the backing well enough, repeat the previous steps
using isopropyl (rubbing) alcohol, and wipe the strip thoroughly with a
damp cloth to remove any residual alcohol.